Robins Run

Post details of your T gauge layouts and the progress you are making.
User avatar
dkightley
Posts: 1289
Joined: Wed Nov 13, 2013 9:43 pm
Location: Nottingham, UK

Re: Robins Run

Post by dkightley »

7th June 2012:

After a break from the layout due to my committments at the Tramway Museum, I managed to get back to something. Here's a start on painting the track. First a coat of light grey enamel.....followed by detailing the sleepers. Here's a shot showing the before and after of painting the sleepers. All done by hand, viewed through a head mounted magnifier:
003_red.jpg
003_red.jpg (25.58 KiB) Viewed 23144 times
I'd also started fitting the track to the first of two truss bridges bought from http://www.TGauge.com:
004_red.jpg
004_red.jpg (25.75 KiB) Viewed 23144 times
Doug Kightley
Webmaster here and volunteer at the National Tramway Museum http://www.tramway.co.uk

User avatar
dkightley
Posts: 1289
Joined: Wed Nov 13, 2013 9:43 pm
Location: Nottingham, UK

Re: Robins Run

Post by dkightley »

22nd August 2012

Robins Run was originally designed to have nine tunnels...but ended up with ten! With this number and the complexity of tunnels, having lift-off sections to reveal the track for cleaning was not all that feasible. So I decided to design my own tunnel liners that were a snug-ish fit for the track so not only would I be able to push/pull out any derailed wagons, etc, I could use the tunnel liners to provide a firm surface for a spring-loaded track cleaning device.

With this design concept, my range of liners and portals were born:
Single track liners - straight and curved.
Single track liners - straight and curved.
002_red.jpg (25.25 KiB) Viewed 23096 times
Single portal with wing walls.
Single portal with wing walls.
004_red.jpg (18.96 KiB) Viewed 23096 times
One wing wall replaced with a straight wall.
One wing wall replaced with a straight wall.
007_red.jpg (19.16 KiB) Viewed 23096 times
For anyone interested, I have a range of single and double track liners and portals, with a chioce of wide or narrow wing walls or straight walls available to order on Shapeways: https://www.shapeways.com/shops/DKTGAUGE
Doug Kightley
Webmaster here and volunteer at the National Tramway Museum http://www.tramway.co.uk

User avatar
dkightley
Posts: 1289
Joined: Wed Nov 13, 2013 9:43 pm
Location: Nottingham, UK

Re: Robins Run

Post by dkightley »

Continuing to bebuild the build log...

30th August 2012

I've now got all of the basic track support in place for both circuits. Its starting to look a little more complex now!
002_red.jpg
002_red.jpg (32.92 KiB) Viewed 23023 times
Here's a shot showing the construction method in a bit closer detail. Explanations probably not needed...
004_red.jpg
004_red.jpg (23.6 KiB) Viewed 23023 times
This last shot actually shows track from four separate loops!
Doug Kightley
Webmaster here and volunteer at the National Tramway Museum http://www.tramway.co.uk

User avatar
dkightley
Posts: 1289
Joined: Wed Nov 13, 2013 9:43 pm
Location: Nottingham, UK

Re: Robins Run

Post by dkightley »

7th September 2012

With the main trackbed glued in position, I'm now able to start concentrating on some of the finer details of the layout.

With the track having two separate loops, each with its own PWM speed controller, and having two crossover paths, I wanted to have full control of the distribution of power to the layout. I used the soldering to the underside of a brass track joiner technique to connect heavy duty copper bell wire for the power distribution. Here'a a shot of a mock-up of the bank of switches on the back of the board. One pair to reverse the direction of each of the two loops, one pair to allow the crossover sections to be powered from either loop, and the final switch to run both loops from one controller.
001_red.jpg
001_red.jpg (22.36 KiB) Viewed 23023 times
I also started putting together the cable controls for the four sets of points. Each point is controlled by a push-pull "piano stop" style button in the back of the board. Here's a couple of points with the cable connectors assembled underneath th track section.
002_red.jpg
002_red.jpg (23.89 KiB) Viewed 23023 times
The existing point slide has been replaced with a 3D printed part that has a connector under the track to which a bowden style cable is attached.
Doug Kightley
Webmaster here and volunteer at the National Tramway Museum http://www.tramway.co.uk

User avatar
dkightley
Posts: 1289
Joined: Wed Nov 13, 2013 9:43 pm
Location: Nottingham, UK

Re: Robins Run

Post by dkightley »

22nd September 2012

Here's a shot of the high tech solution to secure the control cables for the points....gaffer tape.:
013_red.jpg
013_red.jpg (26.97 KiB) Viewed 22920 times

7th October 2012

My first venture into ballasting was on the brick viaduct. I was quite pleased with the results:
001_red.jpg
001_red.jpg (19.96 KiB) Viewed 22920 times

13th October 2012

Another first. I had a lot of space to fill to get the scenery how I wanted it. So, I decided to see how I would get on with aerosol expanding foam - the stuff builders use to fill holes in walls. And it turned out to be a lot of fun...and slightly tricky:
002_red.jpg
002_red.jpg (32.27 KiB) Viewed 22920 times
Spray the foam into the gaps....and it expands.....and expands:
003_red.jpg
003_red.jpg (27.31 KiB) Viewed 22920 times
I had to be careful not to let the expanding foam lift the track bed. Thankfully it didn't...and set nice and hard..and was superb to carve with a scalpel.
Doug Kightley
Webmaster here and volunteer at the National Tramway Museum http://www.tramway.co.uk

User avatar
dkightley
Posts: 1289
Joined: Wed Nov 13, 2013 9:43 pm
Location: Nottingham, UK

Re: Robins Run

Post by dkightley »

18th October 2012

With a little confidence, I made good progress with spraying the ground:
Img_0302_red.jpg
Img_0302_red.jpg (31.34 KiB) Viewed 22920 times
The dramatic scenery soon started to emerge:
Img_0304_red.jpg
Img_0304_red.jpg (27.66 KiB) Viewed 22920 times

28th October 2012

WIth the ground surface developing, the viaduct starts to blend in:
Img_0346_red.jpg
Img_0346_red.jpg (25.66 KiB) Viewed 22920 times
It wasn't all foam. I used up several bags of Shaeways "air" to conserve on foam:
Img_0348_red.jpg
Img_0348_red.jpg (26.34 KiB) Viewed 22920 times
Doug Kightley
Webmaster here and volunteer at the National Tramway Museum http://www.tramway.co.uk

User avatar
dkightley
Posts: 1289
Joined: Wed Nov 13, 2013 9:43 pm
Location: Nottingham, UK

Re: Robins Run

Post by dkightley »

30th October 2012

I started something else new to me - forming the final ground surface. A layer of plaster of Paris over the shaped foam leaving a strip either side of the track. Once dry, I painted an earth colour, then ballasted the track:
Img_0352_red.jpg
Img_0352_red.jpg (31.61 KiB) Viewed 16831 times
Once tha ballast was dry, it was onward with some green matter. Varying colours of scenery flock held in place by dribbling watered down white glue (in the same way as used on ballast). Not bad for a first attempt:
Img_0356_red.jpg
Img_0356_red.jpg (40.71 KiB) Viewed 16831 times

9th November 2012

Time to take stock of progress. Track bed laid, all bridges and tunnels in place, points control cables installed, electrics laid in (including switches to divert power from the two stock controllers - note my novel way of mounting them!! :D ), the foam under-surface all down and trimmed to the desired profile, a start made on laying the plaster ground surface, and a small bit of scenery in place:
IMG_0366_red.JPG
IMG_0366_red.JPG (28.64 KiB) Viewed 16831 times
Doug Kightley
Webmaster here and volunteer at the National Tramway Museum http://www.tramway.co.uk

User avatar
dkightley
Posts: 1289
Joined: Wed Nov 13, 2013 9:43 pm
Location: Nottingham, UK

Re: Robins Run

Post by dkightley »

18th December 2012

Having a general idea of whereabouts I intended placing a village, I started mapping out the roads. Here's my first attempt of a printed road...simply printed on paper and the design shuffled to fit precisely:
Img_0413_red.jpg
Img_0413_red.jpg (37.74 KiB) Viewed 16830 times
And here's how I placed a different, smaller piece of road. The road surface printed on paper and the verges (in this case) printed on a separate piece of paper, cut to shape and glued onto the road suface...and the two layers of paper glued onto thin card:
Img_0416_red.jpg
Img_0416_red.jpg (22.07 KiB) Viewed 16830 times
The green is a sliver of plastic pan scourer I cut to see if it would make hedges!

The road section was then given a very light coat of matt varnish to seal the ink. When dry, I fixed it in position....I think I used no-nails:
Img_0420_red.jpg
Img_0420_red.jpg (30.3 KiB) Viewed 16830 times
I then plaster of paris'd the road in. Here it's ready to paint and scenerise:
Img_0422_red.jpg
Img_0422_red.jpg (27.19 KiB) Viewed 16830 times
Doug Kightley
Webmaster here and volunteer at the National Tramway Museum http://www.tramway.co.uk

User avatar
dkightley
Posts: 1289
Joined: Wed Nov 13, 2013 9:43 pm
Location: Nottingham, UK

Re: Robins Run

Post by dkightley »

21st December 2012

Ever looking ahead in the build process, I concentrated on working out what trees I needed. I'd bought a selection at the Warley show in early December...and I'd made a start making my own (see the thread in Tips & Tricks). Here's the collection I had:
Img_0426_red.jpg
Img_0426_red.jpg (29.75 KiB) Viewed 16829 times
Img_0430_red.jpg
Img_0430_red.jpg (36.27 KiB) Viewed 16829 times
Bet you can't tell which ones I made! 8-)


25th December 2012

Christmas day saw me planting my first hedge....made out of a strip from a plastic pan scourer. pack of 10 for a £1. Potential for lots of hedges...and clean pans:
Img_0432_red.jpg
Img_0432_red.jpg (30.12 KiB) Viewed 16829 times
Doug Kightley
Webmaster here and volunteer at the National Tramway Museum http://www.tramway.co.uk

User avatar
dkightley
Posts: 1289
Joined: Wed Nov 13, 2013 9:43 pm
Location: Nottingham, UK

Re: Robins Run

Post by dkightley »

31st January 2013

Having a lot of white plaster to cover, I started work in the "mountain" section of the layout. Here's a few in-progress shots of where the track makes it way through a rocky canyon:
Img_0451_red.jpg
Img_0451_red.jpg (29.62 KiB) Viewed 16828 times
Img_0456_red.jpg
Img_0456_red.jpg (56.43 KiB) Viewed 16828 times
Img_0463_red.jpg
Img_0463_red.jpg (38.02 KiB) Viewed 16828 times

14th February 2013

To mark the first anniversary of the start of the build, here's one of the photos I took at the time that I'm quite proud of:
Img_0483_red.jpg
Img_0483_red.jpg (51.07 KiB) Viewed 16828 times
Doug Kightley
Webmaster here and volunteer at the National Tramway Museum http://www.tramway.co.uk

User avatar
dkightley
Posts: 1289
Joined: Wed Nov 13, 2013 9:43 pm
Location: Nottingham, UK

Re: Robins Run

Post by dkightley »

March 2013 saw the delivery of my 3D printer.....which marked a significant point in my modelmaking. I could now design and build almost anything.....well not quite anything!

Work on Robins Run was temporarily suspended whilst I spent a few months getting to grips with my new toy. :D :D

By early July, I had sort of mastered the beast....and had produced my first train. ....a Baby Deltic pulling a rake of Mark 1 carriages.:
Img_0589_red.jpg
Img_0589_red.jpg (29.29 KiB) Viewed 17790 times
I had made some tiny bits of progress, though. Notice the blue painted inside of the layout board!
Doug Kightley
Webmaster here and volunteer at the National Tramway Museum http://www.tramway.co.uk

User avatar
dkightley
Posts: 1289
Joined: Wed Nov 13, 2013 9:43 pm
Location: Nottingham, UK

Re: Robins Run

Post by dkightley »

I've got some recent interesting progress to show....but I'm wanting to wait until I can get to catch up so everything is shown chronologically.

To catch up I need some piccies off my camera....but its in the pocket of one of my coats. And the coat has been locked away at the Tramway Museum for nearly two weeks. Should get it back on Saturday!
Doug Kightley
Webmaster here and volunteer at the National Tramway Museum http://www.tramway.co.uk

User avatar
dkightley
Posts: 1289
Joined: Wed Nov 13, 2013 9:43 pm
Location: Nottingham, UK

Re: Robins Run

Post by dkightley »

Only six months progress left to document in order to catch up. :D

17th August 2013

Terraforming continues. Here's a few in-progress shots:
Img_0662_red.jpg
Img_0662_red.jpg (35.22 KiB) Viewed 17734 times
Img_0663_red.jpg
Img_0663_red.jpg (32.29 KiB) Viewed 17734 times
Img_0660_red.jpg
Img_0660_red.jpg (34.43 KiB) Viewed 17734 times
Img_0666_red.jpg
Img_0666_red.jpg (24.58 KiB) Viewed 17734 times
Doug Kightley
Webmaster here and volunteer at the National Tramway Museum http://www.tramway.co.uk

User avatar
dkightley
Posts: 1289
Joined: Wed Nov 13, 2013 9:43 pm
Location: Nottingham, UK

Re: Robins Run

Post by dkightley »

19th August 2013

And progress on the greenery:
Img_0668_red.jpg
Img_0668_red.jpg (27.5 KiB) Viewed 17734 times
Img_0667_red.jpg
Img_0667_red.jpg (35.49 KiB) Viewed 17734 times
21st August 2013

In preparation for forming the lakes, I first laid down some colour....pure guesswork here!!:
Img_0676_red.jpg
Img_0676_red.jpg (53.38 KiB) Viewed 17734 times
And the greenery continues. A lot easier to predict the results.:
Img_0686_red.jpg
Img_0686_red.jpg (51.88 KiB) Viewed 17734 times
Doug Kightley
Webmaster here and volunteer at the National Tramway Museum http://www.tramway.co.uk

User avatar
dkightley
Posts: 1289
Joined: Wed Nov 13, 2013 9:43 pm
Location: Nottingham, UK

Re: Robins Run

Post by dkightley »

23rd August 2013

With the arrival of the "liquid water", having read the instructions twice, I got my feet wet..(no apologies for the pun):
Img_0690_red.jpg
Img_0690_red.jpg (62.95 KiB) Viewed 17734 times
Img_0702_red.jpg
Img_0702_red.jpg (38.03 KiB) Viewed 17734 times
Img_0703_red.jpg
Img_0703_red.jpg (35.58 KiB) Viewed 17734 times
Tricky stuff this liquid water. The instructions say use a toothbrush to get a stipple effect for waves as the epoxy is hardening. I did so, and the effect looked very good...until the surface levelled itself out! I repeated the step after it had hardened a little more...and the same thing happened. Then it was too hard to do anything!

To cheer myself up a little, I decided to do a mini photo shoot:
Img_0696_red.jpg
Img_0696_red.jpg (50.79 KiB) Viewed 17734 times
Img_0697_red.jpg
Img_0697_red.jpg (53.58 KiB) Viewed 17734 times
Doug Kightley
Webmaster here and volunteer at the National Tramway Museum http://www.tramway.co.uk

User avatar
dkightley
Posts: 1289
Joined: Wed Nov 13, 2013 9:43 pm
Location: Nottingham, UK

Re: Robins Run

Post by dkightley »

29th September 2013

Away from the layout, I started to turn my attention to a station...which is located near the front of the board. Here's a shot of my custom platform sections..and the station building. Well, its an early version of the station building. There's no detail in the windows
Img_0747_red.jpg
Img_0747_red.jpg (24.64 KiB) Viewed 17693 times
And the passengers need to get to the other platform....so a bridge is needed. Unfortunately the superb bridge from TGauge.com only spans two lines...and I need my bridge to span three! So...after much hair-pulling and many test prints, I had a bridge! 8-) :
P1010039_red.jpg
P1010039_red.jpg (24.92 KiB) Viewed 17693 times
I'm so glad I decided to splash out on a 3D printer. You decide you want something, so you design and print it! The challenge is actually succeeding in doing so. :shock:
Doug Kightley
Webmaster here and volunteer at the National Tramway Museum http://www.tramway.co.uk

User avatar
dkightley
Posts: 1289
Joined: Wed Nov 13, 2013 9:43 pm
Location: Nottingham, UK

Re: Robins Run

Post by dkightley »

21st October 2013

Back on the layout, a few more trees have grown:
P1010196_red.jpg
P1010196_red.jpg (35.2 KiB) Viewed 17187 times
5th November 2013

Thoughts about how all my hard work can be seen got me thinking about lights....and after a chat with a colleague at the Tramway Museum who supplied the lighting for the Starlight Halloween event, I put together a lighting rig. Four strips of Ikea LED lights...:
Img_0794_red.jpg
Img_0794_red.jpg (22.91 KiB) Viewed 17187 times
Doug Kightley
Webmaster here and volunteer at the National Tramway Museum http://www.tramway.co.uk

User avatar
dkightley
Posts: 1289
Joined: Wed Nov 13, 2013 9:43 pm
Location: Nottingham, UK

Re: Robins Run

Post by dkightley »

17th December 2013

Filling in the gaps around the layout continues. Here, thick paper glued in layers forms a wall to edge a cutting:
P1010208_red.jpg
P1010208_red.jpg (28.86 KiB) Viewed 17186 times
25th December 2013

Christmas Day gave me some free time to get more scenery work done. I'm ballasting here.:
P1010211_red.jpg
P1010211_red.jpg (33.39 KiB) Viewed 17186 times
And here's an overall shot showing how much I've left to cover:
P1010215_red.jpg
P1010215_red.jpg (36.76 KiB) Viewed 17186 times
Doug Kightley
Webmaster here and volunteer at the National Tramway Museum http://www.tramway.co.uk

User avatar
dkightley
Posts: 1289
Joined: Wed Nov 13, 2013 9:43 pm
Location: Nottingham, UK

Re: Robins Run

Post by dkightley »

1st January 2014

A new year...and after the haze of the night before had cleared, I set to:
P1010220_red.jpg
P1010220_red.jpg (61.26 KiB) Viewed 17186 times
P1010221_red.jpg
P1010221_red.jpg (53.55 KiB) Viewed 17186 times
P1010222_red.jpg
P1010222_red.jpg (36.24 KiB) Viewed 17186 times
Doug Kightley
Webmaster here and volunteer at the National Tramway Museum http://www.tramway.co.uk

User avatar
dkightley
Posts: 1289
Joined: Wed Nov 13, 2013 9:43 pm
Location: Nottingham, UK

Re: Robins Run

Post by dkightley »

As I'm finally catching up with real time updates, I thought I'd group shots from the last couple of weeks into different subjects...and then take the lock off so to open the thread up for comments, etc.

First, here's some shots of my way of laying roads:
Img_0838_red.jpg
Img_0838_red.jpg (36.94 KiB) Viewed 17185 times
Img_0845_red.jpg
Img_0845_red.jpg (29.88 KiB) Viewed 17185 times
Img_0854_red.jpg
Img_0854_red.jpg (40.19 KiB) Viewed 17185 times
Doug Kightley
Webmaster here and volunteer at the National Tramway Museum http://www.tramway.co.uk

Post Reply